 Piper Pa19 -  Readme File
 Repaint author: Leen de Jager
 Original aircraft authors:  ROTW, Pa19 ( L18C ) SuperCub ( P-BOER ) for FLY!II

 FILE DESCRIPTION:
 File Description: This is a repaint of ROTW's original "Pa19 SuperCub", a FLY!II aircraft. 
 This repaint illustrates a Piper Supercub wich is still flying these days at the Megeve airport.
 This airplane is operated high in the French Alps.
 In wintertime fitted with ski`s.
 


 INSTALLATION
 After downloading and extracting the files from the Pa19_F-BOUK zip file, copy the Pa19_F-BOUK .pod file to the
 FLY!II/Aircraft folder.

 ATTENTION!!!
 This repaint requires that you have the original ROTW Pa19 files installed in the FLY!II/Aircraft folder.
 The user will have to download not only the original package but also  the latest update for the PA 19 : Pa19-u1.zip
 available on www.simvol/fly or pa19_updt1.zip on Avsim !


 REMOVAL
 Remove the Pa19_F-BOUK .pod file from the Fly!II/Aircraft folder.

 LEGAL STUFF
 This repaint is freeware and may be distributed freely so long as this readme.txt file accompanies it. 
 Copyright for this aircraft is owned by ROTW, therefore, no commercial use of this repaint is permitted. 
 No file may be used in any commercial or other published package without express written permission of the original 
 author(s), ROTW. Aircraft visual model repainting is allowed by ROTW, provided that such repaints are not sold and 
 permission obtained.

 DISCLAIMER
 This file carries no warranty or guarantee, therefore, use of this file is entirely at the user's own risk. 
 I will not accept responsibility for any damages using these files may cause.  
 Should there be any problem, please report them through the FLY! General Forum at AVSIM.  
 This file will be available there.
